DermaRoller For Face Treatment
Before you begin using the DermaRoller For Face Treatment, wash and dry your hands and the area to be treated with soap and water thoroughly. Clean your treatment table with disinfectant and then prepare the following items:
– Derma Roller System with needle lengths of 0.5mm or 1.0mm (included)
– Peptide Mask (available at your local pharmacy)
– Clean towel
– Half a glass of disinfectant: rubbing alcohol or hydrogen peroxide (only – required once per week/treatment)
How To Apply:
1.Roll the Derma Roller gently over the area you wish to treat 4 times vertically, 4 times horizontally, 4 times diagonally to the left and 4 times diagonally to the right (as illustrated below). This is more than enough to stimulate collagen and elastin formation in the skin. Avoid using the Derma Roller on your eyelids or lips.
2.Place one sheet of Peptide Mask on your face and leave the mask on for 10 minutes.
3.Daytime Treatment Only – If you are using the Derma Roller System in the daytime, apply sun protective cream onto the face and neck after removing the Peptide Mask.
4.Treat only once per day, up to 5 times per week when using the Derma Roller System in 0.5mm. Treat only once every 3 to 4 weeks when using the Derma Roller System in 1.0mm.
Care of your Derma Roller
After you have finished using your DermaRoller For Face Treatment, rinse the device under hot water. You will need to disinfect your Derma Roller once a week by standing it head first in half a glass of disinfectant (rubbing alcohol or hydrogen peroxide) for approximately 30 minutes to 1 hour (no longer). Then, remove the Derma Roller from the cup and shake off any excess liquid. Place the Derma Roller on its side on a clean towel to dry. When it is completely dry, store the Derma Roller back into the original case provided. Try to keep the case as clean as possible and stored in somewhere safe.