Microneedle Roller For Body Treatment
Before you begin using the Microneedle Roller For Body Treatment, wash and dry your hands and the area to be treated with soap and water thoroughly. Clean your treatment table with disinfectant and then prepare the following items:
– Derma Roller System with needle lengths of 1.0mm and above (included)
– Nutrient enriched lotion (optional)
– Clean towel
– Half a glass of disinfectant: rubbing alcohol or hydrogen peroxide (only – required once per treatment)
How to Apply:
1.Roll the Micro Needle Roller gently over the area you wish to treat 4 times vertically, 4 times horizontally, 4 times diagonally to the left and 4 times diagonally to the right (as illustrated below). This is more than enough to stimulate collagen and elastin formation in the skin.
2.Wash the treated area with cold water and dry the skin gently with a clean towel.
3.Apply an appropriate amount of nutrient enriched lotion to the area you are treating.
4.Daytime Treatment Only – If you are using the Derma Roller System in the daytime, apply sun protective cream onto body after applying the nutrient enriched lotion.
5.Treat only once every 3 to 4 weeks.
Care of your Derma Roller
After you have finished using your Microneedle Roller For Body Treatment, rinse the device under hot water. You will need to disinfect your Derma Roller once a week by standing it head first in half a glass of disinfectant (rubbing alcohol or hydrogen peroxide) for approximately 30 minutes to 1 hour (no longer). Then, remove the Derma Roller from the cup and shake off any excess liquid. Place the Derma Roller on its side on a clean towel to dry. When it is completely dry, store the Derma Roller back into the original case provided. Try to keep the case as clean as possible and stored in somewhere safe.